Sequential mechanical basin mixer
Ref. 2641
Sequential mechanical mixer with swivel/fixed spout L. 200mm
Sequential mechanical mixer with swivel/fixed spout L. 200mm
+
+
+
DESCRIPTION
Sequential mechanical basin mixer
Ref. 2641Wall-mounted sequential mechanical basin mixer.
Sequential mechanical mixer: opens and closes with cold water, with 70° turning range.
Wall-mounted mixer with swivelling under spout L. 200mm with hygienic BIOSAFE outlet.
Spout suitable for fitting a BIOFIL point-of-use filter.
Spout can be easily fixed in place.
Securitouch thermal insulation prevents burns.
Ø 35mm standard ceramic cartridge with pre-set maximum temperature limiter.
Body and spout with narrow tubes with smooth interiors and very low water volume.
The speed that the water flows through these tubes reduces the development of biofilm considerably.
Thermal shocks are possible without removing the control lever or shutting off the cold water supply.
Flow rate regulated at 5 lpm.
Chrome-plated brass body.
Hygiene control lever L. 150mm requires no manual contact.
Mixer supplied with offset STOP/CHECK wall connectors M1/2" M3/4" ideal for hospitals.
Recommended installation height: 110 - 200mm above the basin surface.
Mechanical mixer ideal for healthcare facilities, retirement and care homes, hospitals and clinics.
Sequential mixer suitable for people with reduced mobility.
Mixer with 30-year warranty.
Sequential mechanical mixer: opens and closes with cold water, with 70° turning range.
Wall-mounted mixer with swivelling under spout L. 200mm with hygienic BIOSAFE outlet.
Spout suitable for fitting a BIOFIL point-of-use filter.
Spout can be easily fixed in place.
Securitouch thermal insulation prevents burns.
Ø 35mm standard ceramic cartridge with pre-set maximum temperature limiter.
Body and spout with narrow tubes with smooth interiors and very low water volume.
The speed that the water flows through these tubes reduces the development of biofilm considerably.
Thermal shocks are possible without removing the control lever or shutting off the cold water supply.
Flow rate regulated at 5 lpm.
Chrome-plated brass body.
Hygiene control lever L. 150mm requires no manual contact.
Mixer supplied with offset STOP/CHECK wall connectors M1/2" M3/4" ideal for hospitals.
Recommended installation height: 110 - 200mm above the basin surface.
Mechanical mixer ideal for healthcare facilities, retirement and care homes, hospitals and clinics.
Sequential mixer suitable for people with reduced mobility.
Mixer with 30-year warranty.
ADVANTAGES
Sequential: opens/closes with cold water
Thermal shocks are possible without removing lever
Sequential: opens/closes with cold water
Spout can be fixed or swivel
TECHNICAL CHARACTERISTICS
Sequential mechanical basin mixer
Ref. 2641Connector | M1/2" |
Technology | BIOSAFE sequential mechanical mixer |
Spout length | 200mm |
Flow rate | 5 lpm |
Temperature limiter | Yes |
Finish | Chrome-plated brass |
Certificates | |
Warranty |